CTEK MXS 25
For those who need power.
The MXS 25 is the perfect choice for batteries that require quick charging, including caravans, boats and the workshop. The temperature sensor adjusts the charge voltage to suit the battery�s temperature to guarantee effective battery charging in all climates. Using its SUPPLY mode, the battery charger provides power even without a battery. The SUPPLY mode is indispensable when changing the battery as you avoid losing difficult-to-restore program settings. Using RECOND mode, you can correct the acid stratification that often occurs in deeply discharged batteries. The battery thereby has its power restored and has a longer service life.
Features & Benefits
|Input voltage AC||220-240VAC, 50-60Hz|
|Output voltage||Nominal: 12V|
|Charging voltage||Normal:14.4V Recond:15.8V Supply:13.6|
|Charging current||25A max|
|Back current drain*||<1Ah per month|
|Ambient temperature||-20�C to +50�C, output power is reduced automatically at higher temperatures.|
|Type of charger||Eight step, fully automatic charging cycle|
|Type of batteries||All types of 12V lead-acid batteries (Wet, MF, Ca/Ca, AGM and GEL)|
|Dimensions (L x W x H)||235x130x65mm|
|Insulation||IP 44 (Outdoor use)|
*) Back current drain is what drains the battery if the charger is connected without the power cord connected.
**) Ripple denotes the amount of interference there is to the current and voltage. A high current ripple heats the battery and shortens its life. A linear charger has a current ripple of 70 - 400% which is much larger than the maximum 5% for a modern sealed battery. Voltage ripple could harm other equipment, which is connected to the battery. The MXS 25 delivers voltage and current with very low ripple. The battery gains a long service life and there is no risk of damage to other electronic devices connected to the battery.
|CTEK MXS 25||£319.99|